IS 1363-2

Dimensions of IS 1363-2 Preferred Threads

Thread (d)	p^a	a		c max	d_a max	d_w min	e min	k			kw^b min	r min	s
Thread (d)	p^a	max	min	c max	d_a max	d_w min	e min	nom	max	min	kw^b min	r min	nom = max	min
M5	0.8	2.4	0.8	0.5	6	6.74	8.63	3.5	3.875	3.125	2.19	0.2	8.00	7.64
M6	1	3	1	0.5	7.2	8.74	10.89	4	4.375	3.625	2.54	0.25	10.00	9.64
M8	1.25	4.00	1.25	0.6	10.2	11.47	14.20	5.3	5.675	4.925	3.45	0.4	13.00	12.57
M10	1.5	4.5	1.5	0.6	12.2	14.47	17.59	6.4	6.85	5.95	4.17	0.4	16.00	15.57
M12	1.75	5.30	1.75	0.6	14.7	16.47	19.85	7.5	7.95	7.05	4.94	0.6	18.00	17.57
M16	2	6	2	0.8	18.7	22	26.17	10	10.75	9.25	6.48	0.6	24.00	23.16
M20	2.5	7.5	2.5	0.8	24.4	27.7	32.95	12.5	13.40	11.6	8.12	0.8	30.00	29.16
M24	3	9	3	0.8	28.4	33.25	39.55	15	15.9	14.1	9.87	0.8	36	35
M30	3.5	10.5	3.5	0.8	35.4	42.75	50.85	18.7	19.75	17.65	12.36	1	46	45
M36	4	12	4	0.8	42.4	51.11	60.79	22.5	23.55	21.45	15.02	1	55.0	53.8
M42	4.5	13.5	4.5	1	48.6	59.65	71.3	26	27.05	24.95	17.47	1.2	65.0	63.1
M48	5	15	5	1	56.6	69.45	82.6	30	31.05	28.95	20.27	1.6	75.0	73.1
M56	5.5	16.5	5.5	1	67	78.66	93.56	35	36.25	33.75	23.63	2	85.0	82.8
M64	6	18	6	1	75	88.16	104.86	40	41.25	38.75	27.13	2	95.0	92.8

Thread (d)	p^a	a		c max	d_a max	d_w min	e min	k			kw^b min	r min	s
Thread (d)	p^a	max	min	c max	d_a max	d_w min	e min	nom	max	min	kw^b min	r min	nom = max	min
M14	2	6	2	0.6	16.7	19.15	22.78	8.8	9.25	8.35	5.85	0.6	21.00	20.16
M18	2.5	7.5	2.5	0.8	21.2	24.85	29.56	11.5	12.4	10.6	7.42	0.6	27.00	26.16
M22	2.5	7.5	2.5	0.8	26.4	31.35	37.29	14	14.9	13.1	9.17	0.8	34	33
M27	3	9	3	0.8	32.4	38	45.2	17	17.9	16.1	11.27	1	41	40
M33	3.5	10.5	3.5	0.8	38.4	46.55	55.37	21	22.05	19.95	13.97	1	50	49
M39	4	12	4	1	45.4	55.86	66.44	25	26.05	23.95	16.77	1	60	58.8
M45	4.5	13.5	4.5	1	52.6	64.7	76.95	28	29.05	26.95	18.87	1.2	70	68.1
M52	5	15	5	1	62.6	74.2	88.25	33	34.25	31.75	22.23	1.6	80	78.1
M60	5.5	16.5	5.5	1	71	83.41	99.21	38	39.25	36.75	25.73	2	90	87.8

Material		Steel
General Requirements	International Standard	ISO 8992
Thread	Tolerance	8g
Thread	International Standards	ISO 724, ISO 965-1
Mechanical Properties	Property Class^a	d≤ 39mm: 3.6, 4.6, 4.8 d > 39mm: as agreed
Mechanical Properties	International Standard	d≤ 39mm: 3.6, 4.6, 4.8 d > 39mm: as agreed
Tolerances	Product grade	C
Tolerances	International Standard	ISO 4759-1
Finish and/or coating		As Processed Requirements for electroplating are converted in ISO 4042. Requirements for non-electrolytically applied zinc flake coatings are converted in ISO 10683 If different electroplating requirements are desired or if requirements are needed for other finishes, they should be agreed between custom and supplier.
Acceptability		For acceptance procedure, see ISO 3269
^a For other property classes see ISO 898-1